Pratley Steel Quickset is a high performance adhesive, metal filler and mender. It is formulated to set hard and match the colour of most ferrous metals. It can be filed, sawn, machined and sanded within 3 hours of mixing.

Features:

  • Quick setting.
  • Metallic colour and lustre.
  • Good adhesive strength.
  • Bonds well most rigid materials.
  • Can be filed, sawn, machined and sanded.
  • Very hard when set.
  • Good shelf life.

Time to set

(at 23° C)(Temperature & quantity dependant) Will gel in 6 minutes. Will be dry to touch in 30 minutes. 60% strength in 3 hours. Completely hard in 3 hours & full strength in 24 hours.

Surface preparation. Surfaces to be bonded must be free of loose dirt, rust, paint, oil and grease. Wire brushing or sanding will substantially enhance adhesion to smooth surfaces.

Mixing procedure.

  • 1. From the tube with the white cap squeeze out a bead of resin onto a flat non-absorbent surface such as a piece of cardboard
  • 2. From the tube with a black cap squeeze out an exactly similar bead of hardener next to the first bead
  • 3. Use only as much as can be applied in 2 or 3 minutes. However, to ensure equal proportions, the beads should not be less than 15 mm long.
  • 4. Replace the colour coded caps on the correct tubes.
  • 5. Using a spatula or thin stick, thoroughly and vigorously mix the two beads together until an even colour is obtained
  • 6. Use within 3 minutes of mixing.

Some suggested uses

  • 1. Filling blow holes in castings.
  • 2. Repairing cracked castings.
  • 3. Bonding metal parts.
  • 4. Making fillets or filling seams in metal parts.
  • 5. Bonding ceramics, slate, tile, etc.where the colour matches.
  • 6. Repairing silver ornaments.
  • 7. Bonding and repairing most rigid materials including china, stoneware, cement, wood, etc.

Not recommended for

  • Bonding rearview mirrors to windscreens.
  • Continuous high temperatures (above 90°C).
  • Flexible materials.
  • Prolonged underwater environment. As the product is used outside our control, we cannot accept liability for any possible failures.

Tips

  • Sand both surfaces with sandpaper before bonding.
  • Pratley Quickset Steel is electrically insulating.
  • Pratley Quickset Steel can be painted over once cured.
  • Pratley Quickset Steel cannot rust

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Pratley High Performance Epoxy Adhesives

  • R85.00



Select A Size!


Other Similar Products

Pratlok Anaerobic Threadlocker

Pratlok Anaerobic Threadlocker

The Pratley Pra..

R199.00

Tags: Glue, Adhesive, Pratley, Epoxy

New Arrivals

Now Trending
New Release!
Cheese Head Slotted Machine Screw M 4 Packet
Now Trending
New Release!
Cheese Head Slotted Machine Screw M 4 Units
Now Trending
New Release!
Cheese Head Slotted Machine Screw M 3 Packet
Now Trending
New Release!
Cheese Head Slotted Machine Screw M 3 Units
Now Trending
New Release!
SALE !
Nitto PVC Insulation Tape
Now Trending
New Release!
SALE !
Homegrown PVC Insulation Tape
Now Trending
New Release!
SALE !
Automotive Masking Tape Blue Core Yellow 80°
Now Trending
New Release!
Methylated Spirits

This Weeks Best Selling Products Are...

Top Seller
Hex Nuts Black M12 - M30 (Sold Each)
Top Seller
Coach Screw M12 (Sold Per Each)
Top Seller
Best Value !
Pneumatic Push In Elbow Tube To Male Thread
Top Seller
Brass Button Vents
Top Seller
Button Head Cap Screw M 5 (Sold Per Each)