• PU-Foam

Zwaluw PU-Foam is a 1-component insulation and construction polyurethane foam developed to create a seal between construction parts

Zwaluw PU-Foam cures in response to moisture from the air and the building material


Benefits:

  • High quality professional PU Foam


Limitations:

  • Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates
  • Not suitable for permanent water load
  • Not suitable for use in cavities with insufficient moisture


Applications:

  • Zwaluw PU-Foam was developed to fill joints around window frames and in construction, partition walls, ceiling and floor joints, surface penetration of pipes and tubes through wall and floors
  • Zwaluw PU-Foam has excellent adhesion to concrete, brick, stone, plaster, wood, metal and many plastics like EPS and XPS, rigid PU foam and uPVC


Directions Of Use:

  • Canister temperature:  +5 to +30 Degree Celsius 
  • Application temperature (applies to environment and substrates) +5 to +35 Degree Celsius
  • Remove cap and screw the straw firmly onto the valve
  • Shake the canister vigorously prior to use at least 20 times
  • To apply foam, turn the canister upside down and press the adaptor
  • Half fill the cavity and, in case of low humidity, lightly spray the foam with water
  • The foam will expand to fill the rest
  • When fixing window frames, use spacers and wedges to hold the fame in place for approximately  24 hours until the foam is fully cured
  • Protect eyes, wear gloves and protective gear
  • Floor-covering and furniture to be covered with paper or plastic foil
  • Joints wider and deeper than 4cm should be filled in multiple layers
  • Wait 15-30 minutes between applications
  • Before each application lightly spray with water
  • Only use in well ventilated areas
  • Store canister upright
  • Pressurized container
  • Protect from sunlight and do not expose to temperatures exceeding +50 Degree Celsius
  • Do not pierce or burn, even after use
  • Contains flammable propellants
  • Do not spray on a naked flame or any incandescent material
  • Keep away from sources of ignition


Surface Preparations and Finishing:

  • Substrates must be clean and free of dust, oil and grease
  • It is important to moisten substrates slightly before use as this improves adhesion and finished cell structure of the foam


Paintability:

  • Can be painted or covered with sealant/plaster when fully cured


Zwaluw PU-Foam is packaged in a aerosol canister of 500ml and 750ml

Zwaluw PU-Foam are available in single units or in boxes of 12 units

MSDS available in documentation tab on this page!

There are no reviews for this product.

Write a review

Please login or register to review

PU-Foam

  • R120.00


Available Options


0 reviews / Write a review


Similar Products

Silicone Universal 1001

Silicone Universal 1001

Den Braven Zwaluw Silicone 1001 Universal is a versatile acetoxy silicone sealant, which cures by re..

R65.00

Acryl-W Sealant

Acryl-W Sealant

Den Braven Zwaluw Acryl-W is a high quality water based acrylic sealantAfter application the product..

R40.00

Allround Sealant

Allround Sealant

Zwaluw Den Braven Allround Sealant is a versatile non filled sealant based on Styrol-Blokcopoly..

R105.00

Butylene-X

Butylene-X

Zwaluw Den Braven Butylene-X is a one component durable mastic based on polybutene and vegetable oil..

R60.00

FP PU Hand Held Foam

FP PU Hand Held Foam

Zwaluw FP PU Hand FoamFire resistant polyurethane foam certified according EN 1366-4Zwaluw FP PU Foa..

R230.00

Fix-O-Chem

Fix-O-Chem

Zwaluw Fix-O-Chem (Styrene Free)Zwaluw Fix-O-Chem is a two-component chemical anchoring system based..

R205.00

Gluescrews SBR

Gluescrews SBR

Zwaluw Gluescrew SBRZwaluw Gluescrews is a fast curing construction adhesive based on  SBR rubb..

R85.00

High Tack

High Tack

Zwaluw Hight TackZwaluw High Tack is a high quality professional adhesive with an extremely high ini..

R135.00

Hybriflex 540

Hybriflex 540

Zwaluw Hybriflex 540 is a high quality professional universal low modulus sealant based on hybrid te..

R110.00

Mirrorfix-MS

Mirrorfix-MS

Zwaluw Mirrorfix-MS is a high quality professional adhesive with extremely high initial tack based o..

R130.00

Silicone NO-MF

Silicone NO-MF

Zwaluw Silicone NO-MF is a versatile neutral silicone sealant for sanitary, building, glazing and fa..

R105.00

Polyflex 422

Polyflex 422

Zwaluw Polyflex 422 is a professional high quality sealant based on polyurethane technology which cu..

R100.00

Super Glue 601

Super Glue 601

Zwaluw Super Glue is a liquid, fast curing adhesive based on cyanoacrylicThe adhesive cures through ..

R12.00

Gasket-Sealant Red

Gasket-Sealant Red

Zwaluw Gasket-Sealant is an acetoxy heat resistant silicone sealant which cures by reacting to moist..

R170.00

Tectane Polyflex 452

Tectane Polyflex 452

Zwaluw Tectane Polyflex 452 is a professional high quality sealant based on polyurethane technology ..

R110.00

Woodflex Hard

Woodflex Hard

Zwaluw Woodflex hard is a high quality filler based on acrylic dispersion for wooden flooringAfter a..

R75.00

Tags: PU-Foam