• Silicone NO-MF

Zwaluw Silicone NO-MF is a versatile neutral silicone sealant for sanitary, building, glazing and façade joints, which cures under influence of humidity to form a durable elastic rubber


Benefits:

  • Neutral curing
  • Almost odorless
  • Semi matt finish
  • Perfect adhesion without primer on most substrates
  • UV, water and weather resistant
  • Mould resistant
  • Non corrosive towards metals


Limitations:

  • Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates
  • Discoloration can occur in dark places and by contact with chemicals


Applications:

  • Zwaluw Silicone NO-MF was specifically developed for durable elastic sealing of connection and expansion joints in concrete, brickwork, curtain wall constructions, glazing systems, kitchen, bathrooms, showers and for industrial applications
  • Compatibility of the edge seals of insulation glass with glazing sealants cannot be guaranteed by the supplier of the sealant, as the composition of the edge seals can be changed by the producer without notice
  • Any advice on the compatibility if glazing sealants to the edge seals of insulation glass is based on experience and therefore not guaranteed


Directions Of Use:

  • A joint with the correct dimensions is able to absorb movements between building materials
  • The joint depth should always be in the correct relationship of the joint width
  • A general rule is the ratio of joint depth to the width of the joint with a joint width up to 10mm, with a minimum of 5mm in width and depth
  • For joints wider than 10mm, the depth is the width divided by 3 plus 6mm


Surface Preparations and Finishing:

  • Application temperature +5 to +40 Degree Celsius (applies to environment and substrates)
  • All substrates must be solid, clean and free of grease and dust
  • Zwaluw Silicone NO-MF adheres perfectly without the use of primer to most non porous substrates
  • Porous substrates to be pre-treated with Zwaluw Primer Universal
  • Always test adhesion prior to application
  • Use Zwaluw Finisher to smooth the joint


Paintability:

  • Zwaluw Silicone NO-MF is not paintable
  • it is recommended covering the edges of the joint with masking tape to prevent surfaces the need to be painted from being contaminated by silicone


Zwaluw Silicone NO-MF are available in cartridges of 300ml

Zwaluw Silicone NO-MF are sold in single units or box quantities of 25 pieces

MSDS Sheet available in documentation tab on this page!

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Silicone NO-MF

  • R105.00



Select A Size!


Other Similar Products

Polyflex 422

Polyflex 422

Zwaluw Polyflex..

R100.00

PU-Foam

PU-Foam

Zwaluw PU-Foam ..

R120.00

Super Glue 601

Super Glue 601

Zwaluw Super Gl..

R12.00

Gasket Sealant Red

Gasket Sealant Red

Zwaluw Gasket-S..

R170.00

Tectane Polyflex 452

Tectane Polyflex 452

Zwaluw Tectane ..

R110.00

Woodflex Hard

Woodflex Hard

Zwaluw Woodflex..

R75.00

Tags: Silicone NO-MF

New Arrivals

Now Trending
New Release!
HELICOIL - Free Running Inserts - Green
New Release!
HELICOIL Set (Eco Thread Repair Kit)
New Release!
Pratlok Anaerobic Threadlocker
SALE !
New Release!
Pratley High Performance Epoxy Adhesives
New Release!
Keys (Pre-Cut) - Y - Series
New Release!
Pratley Epoxy Putty

This Weeks Best Selling Products Are...

Top Seller
Hex Nuts Black M12 - M30 (Sold Each)
Top Seller
Hi-Tensile Bolt M16 (Sold Per Each)
Top Seller
Coupling Nuts Zinc M12 - M20 (Sold Per Each)
Top Seller
SALE !
Makita GA4530 Angle Grinder

Makita GA4530 Angle Grinder

R1,299.00 R1,400.00

Top Seller
Drywall Screws Fine Thread (Sold Per 100)
Top Seller
Cap Screw M 5 (Sold Per 100)
Top Seller
Hi-Tensile Bolt M12 (Sold Per Each)
Top Seller
Cap Screw M 8 (Sold Per 100)